Animal husbandry ventilation EC motor

Animal husbandry fans should adjust the ventilation volume according to the ambient temperature during use, so as to maintain a constant temperature in the breeding area. The traditional damper control and variable frequency motor control have certain defects in mechanical structure, failure rate and energy consumption, especially the variable frequency motor has the risk of burning the motor in the ultra-low speed state

The ECI motor of the F series is an axial flow fan, and the negative pressure fan for animal husbandry is designed as a PMS (permanent magnet synchronous) motor. There are currently two frame sizes: F80ECI, F112ECI

● F80 has a maximum output power of 2.1KW and a maximum torque of 11N.m; F112 has a maximum output power of 3.8KW and a maximum torque of 24N.m;

● Using ferrite magnets, the price is more competitive

● Very high efficiency, the average value exceeds IE4 standard, IEC60034-30-2-2016 (IE4 AC speed regulating motor)

● Very high efficiency in the 600-900rpm speed and power range

● Compact and lightweight design, the stretched casing is more conducive to the application of axial flow fans and negative pressure fans

● Various mounting options: slide rails, feet and B14 flanges in accordance with IEC dimensions

● The driver built into the end of the motor is more convenient for installation and maintenance

● Standard IP55 fully enclosed motor to prevent damage from dust and water spray in any direction (IP56 for customized requirements)

● F series ECI motors are not equipped with external fans (IC411); IC400 needs to be customized for environmental operation

● The default three-phase three-phase power supply, the voltage range is 360-460VAC, under partial load, the motor can be equipped with three-phase 200-240VAC, or single-phase 200-240VAC power supply

● The port has run/stop, CW/CCW, speed regulation control signal, speed feedback, Modbus remote control function